PS3 Wireless Controller Not Working

The Sony PlayStation 3, or PS3, includes one ps3 controller upon purchase, although you can add more later. This wireless controller initially connects on the PS3 that has a USB data cable, which not simply syncs the controller on top of the playback quality game system, and also powers about the equipment. In case your PS3 wireless controller seriously isn't functional, it is advisable to troubleshoot kit.



Instructions

1. Plug the USB data cable into among the two USB ports on the PS3, then insert the opposite end from the cable to the USB port on top of the controller. Do this before powering in the PlayStation 3 system.

2. Power within the PS3 with all ps3 controllers connected to the USB cable. The PS3 automatically detects the controller.

3. Press the "PS" button in the middle of the controller if you've got the equipment disconnected from your PlayStation after it's fired up. Unless you press the button, the device is unable to detect the controller.

For those who have left the PS3 controller disconnected on the USB cable when powering in the PS3 system, it is still possible to ensure the controller connects on the xbox. As long as it is charged about the PS3, you just need to press the "PS" button. This sends a wireless signal for the xbox, informing it from the wireless connection.

4. Connect the PS3 controller for the USB cable when the system does not detect the tools, despite pressing the PS button. It indicates the controller's battery is dead. Hooking up for the USB cable charges buy ps3 controller. Leave the PS3 through to fully charge the controller's battery.

How to Put in a PS3 Controller into a Bluetooth Device

The Sony PlayStation 3 uses Bluetooth technology to plug game controllers wirelessly to the game console. Each time you try to power over a PS3 controller, it will send a Bluetooth signal and connect to the console's internal Bluetooth device. You can a PS3 controller for this device whenever they want, supplying the cheap ps3 controller is charged.

Instructions

1. Connect your PlayStation 3 system and power it on by pressing the round "power" button around the far right of the system case.

2. Press the "PS" button down the middle of your controller. Its light towards the top of the controller begins flashing red since it attempts to register with the system. If this will not, plug the micro-USB cable that provide the controller ( http://www.vdealbox.com/ps3-accessories/ps3-controller.html ) to the PlayStation 3 unit or into a USB port inside your computer and repeat the task.

3. Watch the PS3 screen. The top status bar will indicate a whole new controller is connected along with the unit will answer your button presses around the connected controller.