Tips on how to fix PS3 Laser lens – Baby steps to restore your PS3 Disc Laser

http://stage.nclr.org/index.php/member/52/ http://www.jakesfinerfoods.com/index.php/member/357/ http://www.visitdowntownoxnard.com/index.php/member/128 http://burgerlounge.com/member/1210/ http://acoss.org.au/member/527/ http://knight.miami.edu/index.php/member/443698/ http://www.theurbanrefuge.com/S=0f80f1ed50bc9429945347c39964d1638f1a06dd/member/6878 http://www.lakewoodinc.com/lakewood/index.php/member/583/ http://stcharlesyrs.com/index.php/member/165379/ http://www.brightorangethread.com/member/14683/ http://www.brownmccarroll.com/member/1214/ http://www.baselineresearch.com/member/713/ http://www.mdhearingaid.com/member/1050 http://www.tdadent.or.tz/index.php/member/43/ http://dev.calrec.com/index.php/member/32188 http://www.ideatree.com/index.php/member/8854/ http://www.level2designs.com/member/142875/ http://www.randyz.com/index.php/member/225425/

When the Blu-Ray disk drive as part of your PS3 isn't working properly, then it's likely the PS3 Laser lens has broken. Sony bills you around $150 to repair this problem, which is a huge cost. Also you should wait probably in excess of six weeks to obtain your PS3 console delivered to you in working condition. In the following paragraphs, you are going to learn how to fix PS3 Laser lens errors yourself, with step-by-step instructions. You possibly can repair your PS3 Laser lens yourself, and it also really isn't that tough to do in the least.

What you will really should fix your PS3 Laser lens

 is to obtain mini-screwdriver set (cross-headed screwdrivers) , spare ps3 laser lens kes-400a (these can be obtained from online store, the part number is kem-400a)
and an hour's time. In addition to this, you should place yourself in a clean, well-lit workspace. Therefore, you are able to repair at ease.

Here are some tips on how to fix PS3 Laser lens errors by replacing the broken one by yourself:
1. Eliminate the top cover through your PS3, with the power plug for that Blu-Ray unit.

2. Lift the PS3 Laser lens by reviewing the seated position and intensely gently unclip the silver data ribbon (it should have a blue colored ending about it)

3. Get rid of the two silver screws on the top/bottom on the right-hand side, and the three black screws on the left-hand side on the PS3 Laser lens.

4. Take off the metal casing with the PS3 Laser lens unit., exposing the specific workings in the unit beneath.

5. Unscrew the screws for the black colored plate which takes care of the lens circuitry. Remove this plate carefully.

6. Remove the PS3 Laser lens screws, then eliminate the lens unit itself.

7. Put your PS3 Laser lens in and ensure it is seated correctly. Then start screwing everything together again (just reverse the above instructions)

8. Voila, your PS3 ought to be working again as new with this PS3 Slim Laser lens!